A historic village core with 1880s buildings, now surrounded by the masterplanned Millwater development where most homes date from the 2010s. We install, replace and repair waste disposal units in kitchens across Auckland. We check that your sink, waste pipe and power suit a unit before we fit one, and when an old unit fails we tell you whether it is worth fixing or time for a new one.
Disposal units in Silverdale's Millwater homes and the village
Most homes around Silverdale were built in the 2010s, largely across the masterplanned Millwater development. Where a disposal unit went in when the house was finished, that first unit is now reaching the age where faults start to appear. The most common ones are a motor that hums but will not turn, a leak at the dishwasher inlet, or water starting to drip from the base of the unit as the internal seals wear. The first is usually a quick fix. The last usually means replacement, and we will tell you that rather than resealing something that will leak again.
New subdivisions have their own drain issue. Construction debris, concrete slurry and offcuts are sometimes left in the line when a house is built, and ground food can catch on them and build up. If your kitchen drain has been slow since you moved in, a camera check can show whether something was left behind. The rubble problem tends to surface within the first few years of a home's life, which matches the age of much of the housing here.
The original village has a much older core, with buildings dating back to the 1880s, and older properties there may have older drains that need a closer look before adding a unit. Around the edges of Silverdale, some lifestyle properties are not on the public sewer, so check whether you are on a septic system before choosing a unit, because the advice is different. Millwater's north-facing slopes running down to the Ōrewa estuary mean some kitchen drains have a good fall, but long runs to the street can still collect food if fats are poured down. Every install finishes with the sink filled and released at full flow, so we can watch for drips before we leave.
Local tip: If your Millwater home still has its original disposal unit, check under the sink for drips at the dishwasher inlet, as that connection is often the first to loosen.
For anything else, see our plumbers in Silverdale.
Pricing: quotes are free, and every job gets a fixed price before we start, so there are no surprises on the invoice.
Waste Disposal Units Jobs We Do in Silverdale
- Jammed disposal units
- Septic-safe disposers
Waste Disposal Units Silverdale FAQs
Our Millwater home's original disposal unit has started leaking from the bottom. Can it be fixed?
A leak from the base usually means the internal seals have failed, and replacement is the better option. A leak at the flange or dishwasher inlet can often be resealed.
Can a leaking disposal unit be repaired?
Leaks at the sink flange or connections often can be. Leaks from the body usually mean the unit needs replacing.
Why is my waste disposal unit humming but not working?
It is usually jammed. Turn off the power at the switch and do not put your hand inside. We can free it and reset it.