Tap & Mixer Repairs Auckland

A dripping tap is easy to ignore until it stains the basin, keeps you awake or you see the water bill. Most tap problems come down to a worn washer, seal or cartridge, and they are quick to fix when the plumber turns up with the right part.

We repair and replace kitchen, bathroom, laundry and outdoor taps and mixers across Auckland. From the old two-handle taps in a villa bathroom to the latest European mixer in a new build, we diagnose the fault, source genuine parts where we can, and tell you honestly when replacement makes more sense.

Pricing: quotes are free, and every job gets a fixed price before we start, so there are no surprises on the invoice.

Tap & Mixer Repairs Jobs We Handle Across Auckland

• Leaking tap repair
• Fix a dripping tap
• Mixer cartridge replacement
• Outdoor tap repairs
• New tapware installation
• Stiff mixer repairs

Tap problems we fix

The usual suspects:

• Spout drips after the tap is turned off
• Water leaking from around the handle or base of the mixer
• Handle stiff, loose or hard to turn
• Mixer will not hold a steady temperature
• Low flow from one tap only
• Leaks from the flexible hoses or connections under the bench
• Outdoor taps that drip or will not shut off

Taps versus mixers: different fixes

Traditional taps with separate hot and cold handles use a jumper valve and washer, or a ceramic disc headwork. A dripping spout usually means a worn washer or a damaged seat; leaks around the spindle mean a worn O-ring or gland. These are cheap parts and quick to swap. Quick-closing ceramic disc taps and lever mixers can also cause water hammer, the bang in the pipes when you shut them off fast.

Single-lever mixers use a cartridge that controls both flow and temperature. When the cartridge wears, the mixer drips, gets stiff or will not hold temperature. The right cartridge is specific to the brand and model, so we identify it first. For common brands we often carry stock; for others we source the genuine part.

How It Works

Repair or replace

We repair when the tap body is sound and parts are available. We recommend replacement when the body is cracked or corroded, parts are discontinued, the finish is failing, or the cost of a genuine cartridge comes close to a new mixer. Every new tap sold in New Zealand carries a WELS water efficiency label, so when you replace, you can pick one that uses less water without sacrificing flow. We also check the flexible hoses under the bench. They are a common source of sudden floods once they get old, and swapping them during a tap job is quick.

Pricing

Washer and O-ring jobs are at the low end. Cartridge replacements depend on the part, and new tapware depends on what you choose. We confirm the price before we start, and if you supply your own tapware we can install it, including as part of wider kitchen plumbing work.

Auckland tapware and water

Watercare says Auckland's water is generally soft, but even soft water can leave scale on tapware over time, and supplies from groundwater can be harder. Scale on a cartridge or aerator causes stiffness and low flow. Older homes with low pressure hot water often have mixers designed for mains pressure, which causes poor hot flow at the tap; we can check whether your tapware suits your system. After a mains pressure upgrade, older taps can start to drip because they are under more pressure than before, and a pressure reducing valve can fix that.

Why Choose Cheeky's Plumbers for Tap & Mixer Repairs

Tap & Mixer Repairs FAQs

Tap & Mixer Repairs Across Auckland

Our tap & mixer repairs team works in every Auckland suburb. Find your local plumbers:

Tap & Mixer Repairs Guides

• How to Fix a Leaking Tap: Mixers, Handles and Outside Taps (NZ)

Related Services

See every service we offer.